STUDY OF THE LUMPS TRANSPORTATION BY THE BELT-CONVEYER ROLL SUPPORTS

Details

Parent Category: Geo-Technical Mechanics, 2013

Category: Collection of scientific papers «Geotekhnicheskaya Mekhanika» Issue 112

UDC 622.647.2

Authors:

V. F. Monastyrsky, D.Sc. (Tech.), Professor

R.V. Kiriya, Ph.D. (Tech.), Senior Researcher

A. N. Smirnov, M.S (Tech.)

(IGTM, NAS of Ukraine)

Abstract.

The paper considers one of the important conveyer transport system problems –estimating of dynamic efforts when the lumps are transported by the lines of conveyers of different design: with rigid roll supports, with overhead cable roll supports, with damping roll supports and with overhead roll supports with damping. Solving of this problem helps to estimate the roller operational life in belt conveyers with different roller types. As opposite to other authors, the author considers  inertia forces caused by the belt sagging due to the moving load the key factor which initiates dynamic efforts. The article formulates and solves problems of the belt and line vibration in conveyers with different types of rollers when they transport lumps. Solving of these problems made it possible to determine response force of the roll supports when the belt with lumps moved on them; dynamic factor and response factor for rollers which were equal to a ratio of response force to lump weight; and the belt  critical velocities at which resonance and self-vibration occurred in the conveyer line. Analysis of the obtained results gives the ground to state that the roll support dynamic factor and response factor increase with increasing of the belt velocity, and decrease with increasing of the belt  tautness. Besides, when belt velocity is 2 m/c and more dynamic factor for the rigid rollers is greater than dynamic factor for overheard roll supports. At the same time, response factor for damping roll supports is greater than response factor for overhead damping roll supports at any  belt velocity. The obtained results may be applied in mining, metallurgical and building industry.

Keywords:

lump, roll supports, belt conveyer, dynamic efforts, dynamic factor.

References:

1. Yakxontov, Yu.A. (2005), “Development of the theories and working out the methods of belt conveyers with overhead roller supports calculation for mining enterprises”, Abstract of D.Sc. (Tech.) dissertation, Mountain machines, Moscow, Russia.

2. Seyed, A.Sh. (2009), “Roller supports of powerful belt conveyers linear sections rational parameters substantiation for mining enterprises”, Abstract of Ph.D. (Tech.) dissertation, Mountain machines, Moscow, Russia.

3. Monastyrsky, V.F. (1991), “Working out the methods and the means of powerful belt conveyers reliability’s operation”, Abstract D.Sc. (Tech.) dissertation, Mountain machines, M.S. Poljakov Institute of Geotechnical Mechanics under NAS of Ukraine, Dnepropetrovsk, Ukraine.

4. Bondarenko, L.N. (1985), “Conveyer belts dynamic unstable under large-lump loads transported”, Gornye, stroitelnye, dorozhnye i meliorativnye mashiny, no. 38, pp. 91–93.

5. Bolotin, V.V. (1956), Dinamicheskaya ustoychivost uprugikh system [Dynamic stability of the resilient systems], Gostekhizdat, Moscow, Russia.

6. Timoshenko, S.P. (1967), Kolebaniya v inzhenernom dele [Vibration on engineering], Nauka, Moscow, Russia.

7. Monastyrsky, V.F., Kiriya, R.V., Smirnov, A. N. and Mishchenko, T.F. (2012), “Bulk and roller supports dynamic efforts interactions obtaining for mine belt conveyer”, Geotekhnicheskaya Mekhanika [Geo-Technical Mechanics], no. 104, pp. 146–159.

8. Babakov, I.M. (1968), Teoriya kolebaniy [Theory of vibrations], Nauka, Moscow, Russia.

9. Pankratov, S.V. (1967),  Dinamika mashin dlya otkrytykh gornykh I zemlyanykh rabot [Dynamics of machines for the open pit mining and earthwork], Mashinostroenie, Moscow, Russia.

10. Pаnovko, Y.G. and Gubanova I.I. (1987), Ustoychivost i kolebaniyuprugikh system, [Stability and vibrations of the resilient systems], Nauka, Moscow, Russia.

About the authors:

MonastyrskyVitaly Fedorovich, Doctor of Technical Sciences (D. Sc), Professor, Senior Researcher in Department of Mining Transport Physics and Mechanics, M. S. Polyakov Institute of Geotechnical Mechanics under the National Academy of Science of Ukraine (IGTM, NASU), Dnepropetrovsk, Ukraine, This email address is being protected from spambots. You need JavaScript enabled to view it.

Kiriya Ruslan Vissarionovich, Candidate of Technical Sciences (Ph.D), Senior Researcher, Senior Researcher in Department of Mining Transport Physics and Mechanics, M. S. Polyakov Institute of Geotechnical Mechanics under the National Academy of Science of Ukraine (IGTM, NASU), Dnepropetrovsk, Ukraine, This email address is being protected from spambots. You need JavaScript enabled to view it.

Smirnov Andrey Nikolaevich, Master of Science, Engineer in Department of Mining Transport Physics and Mechanics, M. S. Polyakov Institute of Geotechnical Mechanics under the National Academy of Science of Ukraine (IGTM, NASU), Dnepropetrovsk, Ukraine, sm.contur@mail.ru

 

 

 

 

• < Prev
• Next >