INTENSIFICATION OF PROCESSES IN A FLUIDIZED BED AT THERMAL PROCESSING OF SOLID FUEL

Details

Parent Category: Geo-Technical Mechanics, 2015

Category: Collection of scientific papers «Geotekhnicheskaya Mekhanika» Issue 122

UDC 662.66:66.095.5

Authors:

DyakunI.L, M. Sc. (Tech)

(IGTM NAS of Ukraine)

Abstract.

Intensification of production processes is one of the important problems of science and technology. Especially important is intensification of heat and mass transfer processes and, in particular, thermal processing of solid fuel. One of the most promising technologies of thermal processing of solid fuels with different ash content and degree of metamorphism is a fluidized bed whose economic and ecological indicators correspond to the best world standards. The article focuses on improving of the fluidized bed technology by providing pulsating air (gas) supply into the bed. The article presents a model of and a method of rational parameter calculation for the pulsating flow and solid particle motion and combustion in the fluidized bed. An effect of amplitude-frequency characteristics of the pulsating air supply on the completeness of solid fuel particles combustion in the fluidized bed was studied. Technical facilities (pulsators) were designed which can supply pulsing air flow into the fluidized bed and regulate mode shape and porosity of the air flow

Keywords: intensification, pulsing fluidized bed, pulsator.

References:

1. Korchevoy, Yu.P., Maystrenko, A.Yu. and Topal, A.I.(2004) Ekologicheski chistyie ugolnyie energotehnologii [Ecologically clean coal energytechnologies], Naukova dumka, Kyiv, Ukraine.
2. 2.                   Bokun, I.A. (2011) “Gasification of low-grade fuels pulsed layer”, Proc. of the Republican Scientific and Practical Conference “Prospects of Energy Development in the XXI Century”, Belarusian National Technical University, Minsk, Belarus, 12-14 May 2010, pp.40-45.
3. Gichev, Yu.A. and Adamenko, D.S. (2008) “Analysis of the impact-acoustic pulsating combustion characteristics on the boiler and the development of technical solutions”, Metalurgiyna teplotehnika, new ideology, Dnepropetrovsk, UA, pp.69 – 80.
4. Nakorchevskiy, A.I. (2000). “Dynamics pulsating monodisperse mixture“, Teoreticheskie osnovyi himicheskoy tehnologii, Vol.34, № 1, pp. 11 – 15.
5. Akulich, P.V.(2003) “The wave motion of solid particles in a pulsating gas stream”, Inzhenerno-fizicheskiy zhurnal, Vol.76, № 4, pp. 40 – 45.
6. Dyakun, I.L. (2014) Povyishenie effektivnosti energeticheskoy pererabotki uglya [Increase of efficiency energy coal processing] Naukova dumka, Kyiv, Ukraine.
7. Chemeris,  I.F., Bulat, A.F. and Voziyanov, V.S., M.S. Polyakov Institute of Geotechnical Mechanics under the NAS of Ukraine (2003), Pristriydlyastvorennyapulsuyuchihpovitryanihpotokivutoptsizkiplyachimsharom [Device for creating pulsating air flows in fluidized bed furnace], State Register of Patents of Ukraine, Kiev, UA, Pat. № 57662А.
8. Chemeris,  I.F., Bulat, A.F., Voziyanov, V.S. and Slobodyannikova, I.L., M.S. Polyakov Institute of Geotechnical Mechanics under the NAS of Ukraine (2004), Pristriydlyastvorennyapulsuyuchihpovitryanihpotokivutoptsizkiplyachimsharom [Device for creating pulsating air flows in fluidized bed furnace], State Register of Patents of Ukraine, Kiev, UA, Pat. № 66646А.
9. Chemeris,  I.F., Bulat, A.F., Voziyanov, V.S. and Slobodyannikova, I. L., M.S. Polyakov Institute of Geotechnical Mechanics under the NAS of Ukraine (2005), Pristriydlyastvorennyapulsuyuchihpovitryanihpotokivutoptsizkiplyachimsharom [Device for creating pulsating air flows in fluidized bed furnace], State Register of Patents of Ukraine, Kiev, UA, Pat. № 4290.
10. Chemeris,  I.F., Bulat, A.F., Voziyanov, V.S. and Slobodyannikova, I.L., M.S. Polyakov Institute of Geotechnical Mechanics under the NAS of Ukraine (2005), Pristriydlyastvorennyapulsuyuchihpovitryanihpotokivutoptsizkiplyachimsharom [Device for creating pulsating air flows in fluidized bed furnace], State Register of Patents of Ukraine, Kiev, UA, Pat. № 4855.
11. Chemeris,  I.F., Bulat, A.F., Voziyanov, V.S. and Slobodyannikova I.L., M.S. Polyakov Institute of Geotechnical Mechanics under the NAS of Ukraine (2005), Pristriydlyastvorennyapulsuyuchihpovitryanihpotokivutoptsizkiplyachimsharom [Device for creating pulsating air flows in fluidized bed furnace], State Register of Patents of Ukraine, Kiev, UA, Pat. № 7783.

About the authors:

Dyakun Inna Leonidovna, Master of Science (M. Sc.), junior Researcher in Department of Mine Energy Complexes, M.S. Polyakov Institute of Geotechnical Mechanics under the National Academy of Science of Ukraine (IGTM, NASU), Dnepropetrovsk, Ukraine, This email address is being protected from spambots. You need JavaScript enabled to view it.

• < Prev
• Next >