STRESS-STRAIN STATE OF THE RUBBER VIBRATION ISOLATOR WITH THE COMPOSITE INSETS

UDC 678:539.376

Author:

Grebenyuk S.N., Ph. D. (Tech.) (ZNU)

Abstract.

Two alternatives of the construction of the vibroacoustic isolator with the composite material layer are considered in the paper. The stress-strain state of the construction is obtained on the basis of the finite elements method. The moment scheme of the finite element for the weakly-compressible and composite materials is used in order to improve convergence of results. Influence of the volume content of composite fibers on the value of the vibration isolator settling was analyzed by means of the program complex «МІRЕLА+». Analysis of stress-strain state of the vibration insulator showes that increase in the proportion of fiber (from 0 to 0.3) reduces the maximum draft of construction for 25-30% regardless of the location of the composite layer.

Keywords:

vibration isolator, stress-strain state, the finite elements method, rubber, composite material

References:

1. Bulat, A.F., Dyrda, V.I., Zvyagilskiy, Ye.L., Kobets, A.S. (2011), Prikladnaya mekhanika uprugo-nasledstvennykh sred. Tom 1. Mehanika deformirovaniia i razrusheniia elastomerov [Applied mechanics of elastic-hereditary media. Vol. 1. Mechanics of deforming and breaking down of elastomers], Naukova dumka, Kiev, Ukraine.

2. Dyrda, V.I., Grebenyuk, S.N. and Gomenyuk, S.I. (2012), Analiticheskiye i chislennyye metody rascheta rezinovykh detaley [Analytical and numerical methods for calculating rubber parts], Zaporizhzhya National University, Dnepropetrovsk- Zaporozhye, Ukraine.

3. Kirichevskiy, V.V., Dokhnyak, B.M., Kozub, Yu.G., Gomenyuk, S.I., Kirichevskiy, R.V. and Grebenyuk, S.N. (2005), Metod konechnykh elementov v vychislitel’nom komplekse «MIRELA+» [The finite element method in the computational complex “MIRELA+”], Naukova dumka, Kiev, Ukraine.

4. Marvalova, B. (2007), “Viscoelastic properties of filled rubber. Experimental observations and material modelling”, Engineering Mechanics, vol. 14, no. 1/2, pp. 81-89.

5. Gonzalez, M.N. and Wagner, M.H. (2009), “Influence of rubber pre-processing on the rheological behavior of SBS/Crumb rubber-modified bitumen”, Annual Transactions of the Nordic Rheology Society, vol. 17.

About the author:

Grebenyuk Sergey Nikolayevich, Candidate of Technical Sciences (Ph. D.), Head of the Department of Mathematical Analysis in Zaporizhzhya National University (ZNU), Zaporizhzhya, Ukraine, This email address is being protected from spambots. You need JavaScript enabled to view it.

Attachments:
FileDescriptionFile size
Download this file (18.pdf)18.pdfSTRESS-STRAIN STATE OF THE RUBBER VIBRATION ISOLATOR WITH THE COMPOSITE INSETS458 kB