Semenenko Ye.V., Medvedeva O.O., KyrychkoS.M., Nikiforova N.A. The calculation of parameters and modes of hydrotransport in the development of man-made deposits in the storage of waste products

Details

Parent Category: Geo-Technical Mechanics, 2018

Category: Collection of scientific papers «Geotekhnicheskaya Mekhanika» Issue 142

Geoteh. meh. 2018, 142, 91-102

DOI: https://doi.org/10.15407/geotm2018.142.091

THE CALCULATION OF PARAMETERS AND MODES OF HYDROTRANSPORT IN THEDEVELOPMENT OF MAN-MADE DEPOSITS IN THE STORAGE OF WASTE PRODUCTS

Semenenko Ye.V., Medvedeva O.O., Kyrychko S.M., Nikiforova N.A.

Authors:

Semenenko Ye.V., Doctor of Technical Sciences (D.Sc), Senior Researcher (IGTM, NAS of Ukraine)

Medvedeva O.O., Candidate of Technical Sciences (Ph.D.), Senior Researcher (IGTM, NAS of Ukraine)

KyrychkoS.M., Candidate of Technical Sciences (Ph.D.), Researcher (IGTM, NAS of Ukraine)

Nikiforova N.A., Candidate of Technical Sciences, Assistant Professor (NMetAU)

UDC622.648.001.24:622.7.004.8

Language: Russian

Annotation.

In the article, technologies of pulp preparation and their characteristics and features are described. The technological processes of pulp preparation were studied, and on the basis of results the most promising method was selected for use in domestic mining and processing plants. Dimensions of the pulp preparation unit, which are limited by the upper ridge of the dam, and determined by the required capacity of the slurry, are substantiated. In the calculations in this research work, volume of technogeneous placer is determined according to the adopted specification of mining equipment and is assumed constant, while volume of water flow supplied from the pond is determined with taking into account the flow-pressure characteristics of the water supply system, which can be adjusted during the transition from card to card or transition to new store tier. In addition, rates of specific water consumption for pulp formation were estimated, at which type of slurry and mode of its flow along the highway are changed. A critical diameter of the pipeline was specified for the given parameters of the mining complex and the adopted pulp preparation system. According to the results of the research, parameters of hydromechanization technologies for the development of technogeneous deposits formed in the enrichment waste storage facilities are substantiated.According to the results of the researches and the obtained dependences, it is possible to develop recommendations for substantiating parameters of the processes of restoring the accumulation ability of the spit by using hydromechanization facilities. The results obtained during the work are intended for use by design organizations and mining and metallurgical enterprises to provide sufficient production facilities and to extend life of waste storage facilities by restoring their accumulation capacity.

Keywords:

hydrotransport, man-made deposits, hydrosmixture, consumption-pressure characteristics, high concentration.

References:

1. Semenenko, E.V. (2011), Nauchnye osnovy tekhnologiy gidromekhanizatsii otkrytoy razrabotki titan-tsirkonovykh rossypey [Scientific basis for the technology of hydromechanization of open development of titanium-zircon alluvial deposits], Naukova Dumka, Kyiv, Ukraine.

2. Makharadze, L.I., Gochitashvili, T.Sh., Krill, S.I. et.al (2006), Truboprovodnyy gidrotransport tverdykh sypuchikh materialov  [Pipeline hydrotransport of solid bulk materials], Metsniereba, Tbilisi, Georgia.

3. Baranov, Yu.D., Blyuss, B.A., Semenenko, E.V. and Shurygin, V.D. (2006), Obosnovanie parametrov i rezhimov raboty sistem gidrotransporta gornykh predpriyatiy [Justification of the parameters and modes of operation of the systems of hydrotransport mining], Novaya Ideologiya, Dnipropetrovsk, Ukraine.

4. Gumenik, I.L., Sokil, A.M., Semenenko, E.V. and Shurygin, V.D. (2001), Problemy razrabotki rossypnykh mestorozhdeniy [Problems of development of placer deposits], Sich, Dnipropetrovsk, Ukraine.

5. Krut, O.A. (2002), Vodovygilne palyvo [Carbon fuel],Naukova Dumka, Kyiv, Ukraine.

6. Kyrychko, S.N., Semenenko, E.V. (2013), “Justification of the method of calculating the hydraulic slope during the flow of the pulp with the concentration of paste”, Geo-Technical Mechanics, no. 110, pp. 121-134.

7. Baranov, Yu.D., E.V., Shurygin, V.D., Blyuss, B.A. et.al (2006), “Selection and justification of the parameters of the circulating water supply system of Volnogorsky MMC”, Metallurgical and Mining Industry, no. 4, pp. 100-103.

8. Semenenko, E.V. and Saenko, V.V. (1999), “Selection of the diameter of the pipeline of the hydrotransport complex taking into account the parameters of the transported material”, Geo-Technical Mechanics, no. 12, pp. 17-21.

9. Aleksanrov, V.I. (2000), Metody snizheniya energozatrat pri gidravlicheskom transportirovanii smesey vysokoy kontsentratsii [Methods to reduce energy consumption in the hydraulic transportation of mixtures of high concentration], SPGGI (TU), St. Petersburg, Russia.

10. Kyrychko, S.N., Rtischev, A.B. and Semenenko, E.V. (2014), “Rheological parameters of highly concentrated waste treatment plant TsGOK”, Forum Girnykiv – 2014 [Miners Forum-2014], Dnipropetrovsk, Ukraine, October 2014, pp. 177 – 183.

11. Blyuss, B.A. and Golovach, N.A. (1999), Sovershenstvovanie tekhnologiy predobogashcheniya ilmenitovykh rud [Improving the pre-enrichment technology of ilmenite ores], Polygraphist, Dnipro, Ukraine.

12. Blyuss, B.A., Sokil, A.M. and Goman, O.G. (1999), Problemy gravitatsionnogo obogascheniya titan-tsirkonovykh peskov [The problems of gravitational enrichment of titanium-zircon sands], Polygraphist, Dnipro, Ukraine.

13. Bragin, B.F., Markundovich, F.D. and Chernetska, N.B. (2004), Proektuvannya sporudzhen i sistem truboprovIdnogo i inshykh vydiv transportu [Design of constructions and systems of pipeline and other types of transport], View of the SNU by V. Dal, Lugansk, Ukraine.

14. Medvedeva, O.A. (2014), “Technological solutions for the development of technogenic deposits of the Krivbass mining and processing complex”, Forum Girnykiv – 2014 [Miners Forum-2014], Dnipropetrovsk, Ukraine, October 2014, pp.154 – 161.

15. Medvedeva, O.A. (2012), “Analysis and state-of-the-art storage of mineral processing products”, Zbagachennya korysnykh kopalyn, no. 51 (92), pp. 22-29.

About the authors:

Semenenko Eugeniy Vladimirovich, Doctor of Technical Sciences (D.Sc), Senior Researcher, Head of Department of Mine Energy Complexes, M.S. Polyakov Institute of Geotechnical Mechanics of the National Academy of Science of Ukraine (IGTM, NASU), Dnepr, Ukraine, This email address is being protected from spambots. You need JavaScript enabled to view it. .

Medvedeve Olga Alekseevna, Candidate of Technical Sciences (Ph.D.), Senior Researcher, Senior Researcher in Department of Geodynamic Systems and Vibration Technologies, M.S. Polyakov Institute of Geotechnical Mechanics NAS of Ukraine (IGTM, NAS of Ukraine), Dnepr, Ukraine, This email address is being protected from spambots. You need JavaScript enabled to view it. .

Kyrychko Serhii Mykolaivich, Candidate of Technical Sciences (Ph.D.), Researcher in Department of Geodynamic Systems and Vibration Technologies, M.S. Polyakov Institute of Geotechnical Mechanics of the National Academy of Science of Ukraine (IGTM, NAS of Ukraine), Dnepr, Ukraine, This email address is being protected from spambots. You need JavaScript enabled to view it. .

NykyforovaNinaAnatoliyevna, Candidate of Technical Sciences, Assistant Professor at the National Metallurgical Academy of Ukraine under the Ministry of Education and Science of Ukraine (NMetAU), Dnepr, Ukraine, This email address is being protected from spambots. You need JavaScript enabled to view it. .

• < Prev
• Next >