Stadnichuk М.М., Krukovskyi О.P., Kurnosov S.А., Makeiev S.Yu., Semenyuk М.І. Calculation of parameters of the protection means for roadway districts in which cement-mineral mixtures are used
- Details
- Parent Category: Geo-Technical Mechanics, 2022
- Category: Geo-Technical Mechanics, 2022, № 163
Geoteh. meh. 2022, 163, 108-118
https://doi.org/10.15407/geotm2022.163.108
CALCULATION OF PARAMETERS OF THE PROTECTION MEANS FOR ROADWAY DISTRICTS IN WHICH CEMENT-MINERAL MIXTURES ARE USED
1Stadnichuk М.М., 1Krukovskyi О.P., 1Kurnosov S.А., 1Makeiev S.Yu., 2Semenyuk М.І.
1 Institute of Geotechnical Mechanics named by N. Poljakov of National Academy of Sciences of Ukraine, 2Center for Waterproofing and Roofing LLC, Kyiv
UDC 622.268.13: 622.268.7
Language: English
Abstract. The method for calculating parameters of the cast and packed protective-insulating walls was improved. The method is distinguished by the combined accounting of physical and technical properties of cement-mineral mixture used in the construction of the wall and the intensity of stress changes in the hardening concrete depending on the mining, geological and technological conditions of the roadway functioning. The following factors are taken into account when calculating the change in loads on the protection means of the roadway district over time: weighted average compressive strength of the rock layers in the roadway roof and floor; category of cavability of the coal seam roof; step of the first and subsequent roof falls; rate of longwall face advancing.
To substantiate the correspondence of the mixture physical and technical properties (the intensity of concrete hardening over time) to the change in loads on the protection means of roadway, the values of the limit strength of concrete for uniaxial compression, obtained according to standard tests in laboratory conditions, are used. In order to take into account mine conditions for the construction and functioning of the protective-insulating walls, dimensionless coefficients of influence of the following factors were introduced into the method for calculating their parameters: the wall structure; irregularities of relief of the underworked and overworked rocks pressing on the wall; chemical aggressiveness of mine water, which is used to dissolve the mixture.
For the purpose of further controlling condition of supports and protection means in the belt roadway No. 166 of the production enterprise Lisova Mine of the state enterprise Lvivvugillya and adjusting parameters of the protective-insulating wall, a method of mine experimental research is proposed. The method provides for complex studies of the mining condition at all stages of mining operations - during roadway driving, in zone of influence of the longwall bearing pressure, as well as in zones of intense and constant displacements behind the longwall. The displacement of the roadway contour and the change of loads on the means of its protection depending on the location of the longwall face and the speed of its advance are subject to measurement. The criterion for assessing condition of the protective-insulating wall is its relative vertical deformation over time.
The results of the calculation of rational parameters of the protection means in the belt roadway No. 166 (width of the berm and packed wall) with the specified physical and technical properties of the cement-mineral mixture are presented. Based on them, scientific and technical recommendations were developed for support setting and protection of this roadway.
Keywords: reuse of roadway districts, protection means of roadway, cement-mineral mixtures, cast and packed protective-insulating walls, intensity of the protection means loading
REFERENCES
1. Luan, H., Jiang, Y., Lin, H. and Li, G.(2018), Development of a New Gob-Side Entry-Retaining Approach and Its Application, Sustainability, 10, 470. https://doi.org/10.3390/su10020470
2. Kurnosov, S.A., Osenniy, V.Ya., Zaderiy, V.V., Tsikra, А.А. and Аvеrkin, D.I. (2015), “Research of interdependence between methods of concrete rib-side track building and the track strength and deformation parameters”, Geo-Technical Mechanics, no. 122, pp. 128–139.
3. Smerechanskij, S.S., Kurnosov, S.A., Opryshko, Yu.S. and Tsikra, А.А. (2017), “Study of the mechanism of change in the stress-strain state of guard structures in the process of mining operations”, Geo-Technical Mechanics, no. 135, pp. 198–207.
4. Spitsyn, Yu.G. (ed.) (1975), Ustanovleniye kriteriyev otsenki ustoychivosti krovli i razrabotka klassifikatsii krovel' po prinyatym kriteríyam ustoychivosti [Establishment of criteria for assessing the stability of the roof and the development of a classification of roofs according to the accepted criteria for stability], DonUGI, Donetsk, SU.
5. Reva, V.N., Melnikov, O.I. and Raiskii, V.V. (1995), Podderzhanie gornyh vyrabotok [Maintenance of mine workings], Nedra, Moscow, Russia.
6. Borzykh, A.F., Danilov, A.A. and Totskii, A.V. (1985), “Stability of reinforced concrete bollards during the protection of development workings”, Coal, no. 6, pp. 14–15.
7. Bulat, A.F., Iljashov, M.A. and Usachenko, B.M. (ed.) (2004), Vremennyy tekhnologicheskiy reglament po okhrane podgotovitel'nykh vyrabotok ugol'nykh shakht litymi polosami iz tverdeyushchikh materialov [Temporary technological regulations for the protection of development workings of coal mines with cast strips of hardening materials], RIA Dnepr-VAL, Dnepropetrovsk, Ukraine.
8. Ukraine Ministry of Fuel and Energy of Ukraine (2002), КD 12.01.01.503-2001 Upravleniye krovley i krepleniye v ochistnykh zaboyakh na ugol'nykh plasta s uglom padeniya do 350. Standart [Roof control and fastening in longwalls on coal seams with dip angle up to 350. Standard], State Department of Coal Industry of the Ministry of Fuel and Energy of Ukraine, Donetsk, Ukraine.
9. Krukovskyi, О.P., Kurnosov, S.A., Krukovskaja, V.V., Zaderij, V.V. and Аvеrkin, D.I. (2016), “Determination of rational parameters of rock-anchor and security structures at the junction of a longwall with an excavation drift”, Modern technologies in mechanical engineering, transport and mining: Bulletin of KrNU named after Mykhailo Ostrogradskyi, no. 4(99), pp. 54–60.
10. Krukovskyi, О.P., Kurnosov, S.A., Bulich, Yu.Yu., Opryshko, Yu.S., Zemliana, Yu.V. and Yastrub, R.I. (2020), “Experimental and industrial test of the combined method for gate roadway supporting”, Geo-Technical Mechanics, no. 150, pp. 106–115. https://doi.org/10.15407/geotm2020.150.106
About authors:
Stadnichuk Мykola Мykolaiovych, Engineer, Сhief Designer in Department of Mine Energy Complexes, Institute of Geotechnical Mechanics named by N. Poljakov of National Academy of Sciences of Ukraine (IGTM NAS of Ukraine), Dnipro, Ukraine, This email address is being protected from spambots. You need JavaScript enabled to view it.
Krukovskyi Oleksandr Petrovych, Corresponding Member of NAS of Ukraine, Doctor of Technical Sciences (D.Sc.), Deputy Director of the institute, Institute of Geotechnical Mechanics named by N. Poljakov of National Academy of Sciences of Ukraine (IGTM NAS of Ukraine), Dnipro, Ukraine, This email address is being protected from spambots. You need JavaScript enabled to view it.
Kurnosov Serhii Anatoliiovych, Doctor of Technical Sciences (Sci.D.), Senior Researcher, Senior Researcher in Department of Problems of Mineral Mining at Great Depths, Institute of Geotechnical Mechanics named by N. Poljakov of NAS of Ukraine (IGTM NAS of Ukraine), Dnipro, Ukraine, This email address is being protected from spambots. You need JavaScript enabled to view it.
Makeiev Serhii Yuriiovych, Candidate of Technical Sciences (Ph.D.), Senior Researcher, Senior Researcher in Department of Problems of Mineral Mining at Great Depths, Institute of Geotechnical Mechanics named by N. Poljakov of NAS of Ukraine (IGTM NAS of Ukraine), Dnipro, Ukraine, This email address is being protected from spambots. You need JavaScript enabled to view it.
Semenyuk Мykola Ivanovych, Engineer, Director of Center for Waterproofing and Roofing LLC, Kyiv, Ukraine, This email address is being protected from spambots. You need JavaScript enabled to view it.
